Firmware Wireless Antenna

Download description

Please use Green-GO Update Connection to update the firmware.

To start the Antenna in the BOOT mode, hold down the small button while powering the Antenna.

Firmware 4a62 Release Notes
– Single Dect Slot mode. In the connection menu on the belt pack the option Audio: Normal Band or Narrow Band. This will allow to switch between the normal 7khz bandwidth and a narrow 4khz bandwidth. This narrow bandwidth will use a single Dect slot instead of the regular double slot. This will increase the amount of wireless belt packs that can be simultaneously active.The user can select on device basis if a single slot narrow bandwidth is to be used or the double slot normal bandwidth.

Firmware 4a61 Release Notes
-Auto config Update. This function will check for configs with the same name. If a config is found with the same name but a newer time stamp the device will automatically clone this new config. This feature will also solve a bug where a corrupt config (-) will automatically heal from a device with a right config. This function is always active
-Suppress warning message this function will allow the user to suppress warning popups with any button press. This function is always active
-Improved connection to Green-GO control.The communication between Green-GO devices and Green-GO control has improved. This results in A much more stable connection, especially larger Green-GO systems will benefit from this update.

 

Downloads

  • Bugfix wireless belt pack causing white noise on Green-GO system
  • Bugfix wireless belt pack talk on channel with closed gate causing an active channel on other devices
  • Bugfix when pairing re-connecting immediately
  • Bugfix when pairing not showing antenna name
  • Various Dect settings optimized
  • Improved connection to Green-GO control
  • Improved connection to Green-GO control
  • bug fix user settings getting lost
  • Audio responce improved
  • Optimizations