V4 Firmware Beacon

Download description

Please use Green-GO Update Connection to update the firmware.

To start the Beacon in the BOOT mode, hold down the small button while powering the Beacon.

Firmware 4a61 Release Notes
-Auto config Update. This function will check for configs with the same name. If a config is found with the same name but a newer time stamp the device will automatically clone this new config. This feature will also solve a bug where a corrupt config (-) will automatically heal from a device with a right config. This function is always active
-Suppress warning message this function will allow the user to suppress warning popups with any button press. This function is always active
-Improved connection to Green-GO control.The communication between Green-GO devices and Green-GO control has improved. This results in A much more stable connection, especially larger Green-GO systems will benefit from this update.

 

Downloads

  • fix: Popups not working properly in 4a67
  • fix: Direct talks not working in 4a67
  • fix: menu loop in program audio volume
  • fix: menu loop in output volume
  • fix: line in active when audio below threshold
  • bugfix - devices that are powered on for prolonged periods of time could show strange behaviour.
  • Config colors implemented. Status colors for idle, talk, cue, call can now be set using the GreenGO control software Under: Configuration Settings -> Colors
  • Improved connection to Green-GO control
  • Warning popups can be suppressed by any button press
  • Fix latency connection
  • Optimisations